The Best Car Phone Mount (2024)

For this guide, staff writer Roderick Scott tested 17 different car mounts for dash, vents, and CD slots for hours in both a 2008 Honda Accord and a 2023 Kia Telluride over several different types of terrain, including city streets riddled with potholes, uphill side roads, and off-roading. He has covered consumer technology, including smartphone accessories, for over 15 years.

But in reality, for many drivers it’s the source for navigation, information, messages, music, and (of course) phone calls. A good smartphone mount can greatly reduce the risks of using a phone while driving by steadily holding your phone where you can easily see the screen and access on-screen buttons without blocking your view or forcing you to take your eyes off the road for too long. With the phone at dash level, using it becomes more like operating a car radio, which, according to a 2013 report by the National Highway Traffic Safety Administration (PDF), “has little effect on driving performance or crash risk.” We still think phone use while driving is a distraction, but clearly, placement matters, and a good mount makes the inevitable phone use less dangerous.

Any good car phone mount needs do a few things well, including:

With this criteria in mind, we’ve researched the specs and features of more than a hundred available models over the years, searching for well-reviewed and best-selling models on Amazon and popular car sites.

First, you need to consider where you want your phone mount located and how you want to attach your phone to it. There are several types of car phone mounts, and the one that will work best for you depends on your car’s dash design, personal preferences, and, for windshield mounts, regional regulations. We’ve broken down the different types in the photo gallery above.

In order to get a feel for how each model works with different sizes of phones, we tested each mount with a 6.1-inch Google Pixel 7a, a 6.7-inch Google Pixel Pro, and both the 6.7-inch iPhone 14 Plus and the new iPhone 15 Plus.

We evaluated how easy it was to set up the mount on the dash or windshield, attach or remove a phone, and adjust the mount in order to best position the screen. We also evaluated whether the phone remained steady while driving to easily read the screen, if the tension arms or magnet attachment held the phone securely over rough terrain, and how well the mount stayed attached to the car with different phones and driving conditions. For dash and windshield mounts, we also tested the reliability of their suction cups on a window and two textured vinyl dashboards.

After another round of testing, we’re happy to report that the iOttie iTap Magnetic 2 remains our top choice for car phone mounts. This mount stands out for its ease of installation, versatility, and ability to keep your phone securely in place. We’ve tried out the different versions of the iTap Magnetic 2, and we’re confident that the air-vent, CD-slot, and dashboard/windshield mounts will work well for any type of vehicle. The iTap Magnetic 2 system uses a magnetic plate to install, even with MagSafe iPhones, so if you have a newer iPhone, you may want to buy our MagSafe pick instead.

It’s compact and holds just about any phone securely. The dashboard mount measures only 5 inches tall, while the air-vent and CD-slot mounts are just 2 inches, so they won’t occupy much space. The Magnetic 2 also includes two powerful magnet plates: one small and one large. These magnets are strong enough to hold your phone in place, even when it’s covered with a case.

It attaches easily and stays in place. Every iTap Magnetic 2 model utilizes the same ball joint, magnetic plates, and designated mounts. Installing the air-vent mount is simple—just attach the ball joint to the vent-mount section, twist the lock for the air-vent blade, and you’re done. For the CD-slot mount, you’ll want to remove any discs from the CD slot, then insert the CD-slot connector and use the locking lever to secure it in place. And for the dashboard mount, you’ll peel off the protective film off the dashboard pad, place it on your dash or windshield, press down to create suction, and secure it by pressing down the locking lever.

It can hold your phone in place across smooth or rough roads. In our tests, all three versions were able to support a wide range of phone sizes, holding them firm and steady while driving, even over unpaved roads. All three bases attach to the magnet mount with a ball joint that lets you rotate the phone 360 degrees between vertical/portrait to horizontal/landscape modes, as well as about 45 degrees to the sides or 30 degrees up and back. This wide range of adjustability, combined with the iOttie’s mounting options, means you should be able to find a setup that works well for your vehicle.

Flaws but not dealbreakers

The iTap Magnetic 2 magnetic plates and mounts usually work well, but they’re not perfect. Driving over large potholes may shift your phone slightly, causing your phone to rotate to a vertical angle while still magnetically attached to the mount. However, the magnetic plates still held up, and the Pixel 7 Pro, iPhone 14 Plus, and iPhone 15 Plus phones I used for testing never completely fell off the mount.

The iOttie Auto Sense charging mount is ideal for those looking to keep their phone charged while mounted on their dashboard or windshield. It has a unique design that includes a telescoping arm, self-clamping tension grips, and wireless-charging capabilities for Android phones (10 W) and iPhones (7.5 W). And the Auto Sense is designed to be easy and straightforward to install, similar to the iOttie iTap Magnetic 2 dash mount.

It installs easily. To install the Auto Sense mount, you place it on the desired area of your dashboard or windshield, lift the locking lever, and press the suction cup down to create suction. Next, you secure it by pressing the locking lever down. You can further customize its placement by adjusting its angle and extending the telescoping arm to bring your phone closer to you.

It doesn’t need magnets. The Auto Sense mount is designed to keep your phone securely in place with self-clamping tension grips activated by a proximity sensor and two servo motors. You can release your phone by pressing the buttons on the side. The Auto Sense mount also comes with a support foot that can accommodate larger phone models (up to 6.7 inches) and allows for wireless charging. However, some Android phones may need minor adjustments to prevent accidental long presses of the volume-down button, which I experienced on my Pixel 7 Pro.

If you have an iPhone 12, 13, 14, or 15, the ESR HaloLock mount is a great MagSafe solution that doesn’t take up a lot of space and can securely mount your iPhone without extra hardware. Its strong magnet keeps your iPhone in place, and its ball-joint design lets you adjust your phone to any angle. The HaloLock can charge an iPhone at speeds up to 7.5 W while on the go with an optional car charger, but you’ll have to buy one separately.

Its design includes a support arm for a secure fit. Many air-vent car phone mounts keep it simple with a clip that attaches to the vent blade. The HaloLock mount has a support arm to go on or below the air vent for extra stability. While other air-vent mounts can move slightly when driving over deep potholes, the HaloLock mount didn’t move at all during my testing.

It can be mounted to an air vent or a dashboard. The HaloLock is marketed as an air-vent mount, but it also includes a ball-head anchor to mount to a dashboard. The anchor works as well as the air-vent mount, but like many dashboard mounts, it requires a flat surface in order to work effectively. It’s worth noting that the anchor doesn’t use a gel-based adhesive like other dashboard mounts; you can apply it to an area only once.

The Anker 613 MagGo dashboard mount is a great, reliable MagSafe mount that also charges your iPhone. With a long, adjustable arm that stays steady on even bumpy terrain, this mount features a strong MagSafe-charging ring that supports speeds up to 7.5 W and even glows in the dark for nighttime placement. Plus, it includes a two-port car charger and cable-management clips in the box.

Its long, adjustable arm keeps your phone stable. The Anker 613 is one of the few dash mounts with a long arm that held up during our testing. The arm is adjustable up to 134 degrees, and the magnetic mount is adjustable to tilt toward you or the passenger, or to hold your phone in a vertical landscape. It didn’t shake when driving over uneven roads and kept our iPhone in place.

This car mount may not be the best solution for all vehicles. It will work only on flat, non-textured dashboards. If your vehicle dash has curved, grooved surfaces, or has a large display taking up space in the dashboard, the 613 might not work for you.

Three new and ostensibly faster charging car phone mounts were announced earlier this year. Mophie recently unveiled their $70 Snap+ Wireless Charging Mount, while ESR’s new $36 HaloLock and iOttie’s new $55 Velox Mini charging mounts were announced earlier this year. These new mounts add Qi2 wireless charging, which is compatible with more devices outside of Apple’s iPhones, offers an extra ring of magnets to provide improved alignment, and faster wireless charging of up to 15 W.

We’ll test these new mounts to see how they compare to our current picks soon.

Dash/windshield-mounted models

The Loncaster Silicone Car Phone Holder is a horizontal silicone mold that you can drop your phone into. It does a good job of holding your phone in place and attaches easily to your dash, but it looks cheap, the phone holder covers parts of your screen, and the silicone mold gets dirty quickly.

The ZeeHoo 15W Wireless Car Charger is a functional budget mount but lacks the necessary 12-volt lighter charger to power it.

Vent-mounted models

Belkin’s BoostCharge has a great magnetic/MagSafe mount, but it doesn’t sit securely on the vent with larger phones like the iPhone 14 Plus, the iPhone 15 Plus, or the Pixel 7 Pro.

The Kenu Airframe Magnetic has a good, strong magnet to hold your phone, but its clamp doesn’t stay secure once mounted, which can cause your phone to shake often while in motion.

CD slot–mounted models

The Scosche MagicMount CD is comparable to our CD-mounted pick, but the overall design of the iOttie mount is more appealing and easier to install.

Ticilfo’s CD-slot mount is a simple plastic model that allows you to mount and remove your phone with one hand, but it can shake a bit when driving over bumps.

MagSafe models

The GloPlum Magnetic is a MagSafe air-vent mount with a strong magnet, and it offers up to 15 W charging speeds. But it doesn’t have much support or a long warranty in case something goes wrong with it.

The iOttie Easy One Touch Wireless 2 was our previous MagSafe-mount pick. While it’s still a great choice, our picks offer the same features and take up less space.

The iOttie Velox Mini has a built-in ventilation system that keeps your iPhone cool. It has one of the strongest magnets on a car mount that we’ve tested thus far. But the ball joint that allows it to rotate is a little stiff to adjust compared to our picks.

The expensive Belkin BoostCharge Pro’s only advantage is its fast charging speeds. Our picks held and adjusted the iPhone better.

The Scosche MagicMount Pro has the smallest footprint for a car mount, but it didn’t prevent my iPhone from tilting face down when driving over bumps or uneven pavement.

The Spigen OneTap Pro lets you use the vent clip by itself or the vent clip and swing arm, which gives you more flexibility for positioning your iPhone. However, the swing-arm setup did move a bit when driving over bumps. Our picks performed better in terms of stability and magnet strength.

This article was edited by Arthur Gies and Caitlin McGarry.