What is the spec of Cisco 93180?

The Cisco Nexus 93180LC-EX Switch is the industry's first 50-Gbps-capable 1RU switch that supports 3.6 Tbps of bandwidth and over 2.6 bpps across up to 32 fixed 40- and 50-Gbps QSFP+ ports or up to 18 fixed 100-Gbps ports (Figure 3). The switch can support up to 72 10-Gbps ports using breakout cables.

What are 2 modes of operation in which Nexus 9000 series switches can be configured in?

The Nexus 9000 can be used in NXOS mode for traditional 3-tier architectures, Spine-Leaf (CLOS) architectures, or Generation 1 SDN solutions such as OpenFlow . In ACI mode the Nexus 9000 offers the industry's leading architecture for the next generation of data center networking.

What is Cisco secret Type 6?

Type 6. This is true encryption using 128 bit AES counter mode . The administrator defines a master key which is used by IOS XE to encrypt the password. The encrypted password that is visible in the running-config cannot be copied between devices UNLESS the original Master Key is configured on the new device!

What is Secret 9 Cisco?

Secret encryption type 9 is more secure , so we recommend that you select type 9 to avoid any issues while upgrading or downgrading. If you do not specify an encryption type for the secret password, the password is auto converted to type 9. This is applicable in Cisco IOS XE Gibraltar 16.10. 1 and later releases.

What is the port speed of Cisco 93180?

The Cisco Nexus 93180YC-FX3H (Figure 1) is a 1RU switch with 24 downlink ports (licensed to use any 24 of the 48 ports) capable of supporting 1-, 10-, or 25-Gbps Ethernet. The 6 uplink ports can be configured as 40 and 100-Gbps Ethernet, offering flexible migration options.

What is the highest Cisco firewall security level?

Here are a couple of examples of security levels: Security level 0: This is the lowest security level there is on the ASA, and by default, it is assigned to the “outside” interface. ... Security level 100: This is the highest security level on our ASA, and by default, this is assigned to the “inside” interface. More items...

What is Cisco Secure Firewall Threat Defense Virtual?

In a nutshell… Cisco Secure Firewall Threat Defense Virtual simplifies threat protection with consistent security policies across physical, private and public cloud environments .

What is the difference between Cisco IKE v1 and v2?

Compared with IKEv1, IKEv2 simplifies the SA negotiation process . IKEv2 uses two exchanges (a total of 4 messages) to create an IKE SA and a pair of IPSec SAs. To create multiple pairs of IPSec SAs, only one additional exchange is needed for each additional pair of SAs. IKEv2 supports EAP authentication.

N9K C93180Yc Ex Eol (2024)

1. End-of-Sale and End-of-Life Announcement for the Cisco N9K ...

Cisco announces the end-of-sale and end-of-life dates for the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX. The last day to order the affected product(s) is ...
Cisco announces the end-of-sale and end-of-life dates for the Cisco N9K-C93180YC-EX and Cisco N9K-C93108TC-EX. The last day to order the affected product(s) is August 9, 2022. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.

N9K C93180Yc Ex Eol (2024)

FAQs